Setting up a rocker switch often feels intimidating, but it does not have to be. With a few steps, you get to figure out how to wire it up and get things moving. If you need help wiring your 12V rocker switch, this step-by-step guide will be handy. All you need to do is ensure you have the right materials and can follow the instructions without skipping a step.

 

Get the Right Materials

Before you get started on wiring your socket, there are essentials you need to have. Without them then wiring will take way longer than expected.

• Rocker switch. It goes without saying that you need to get yourself a rocker switch. There are various styles and sizes in the market, so ensure you get what works best for your circuit.
• Electrical wire. If you are wiring your home then getting a 14-gauge wire will work just fine with the appliances.
• Wire strippers. Having these ensures that you can remove the insulation and join your wires together without worry.
• Soldering iron. Once two ends have been joined, all you need is a soldering iron to make the connection stronger.
• This will act as glue when soldering the two ends of the wires together.

 

Process

Once all the materials are gathered, all that is left is for the wiring to begin. Here is a detailed guide on how to work around it.

 

Disconnect the Circuit

Before any work starts, ensure the power is off, or the circuit is disconnected from the power source. Doing this will prevent any accidents from occurring as you work on the installation.

 

Identify the Installation Site

Whether you plan on replacing a spoilt switch or getting a new one in, ensure you identify the point you want to work with.  Once that is identified, go ahead and prep the spaces by either drilling into the wall or simply ensuring the wires align and won’t offer interference when work starts.

 

Cut and Strip the Wires

With the site prepped, the next step is to cut and strip the wires so they can be bare. Ensure this is about 2 inches from the edge of the wire to the conductive material.

 

Connect to the Rocker Switch

Connect the wires to the appropriate terminal on the 12v rocker switch. Ensure that the power source wire is connected and connect the output wires to the device the rocker switch will be controlling. Solder these wires together so they do not come off.

 

Mount the Switch

With everything connected, take the switch and mount it in the location you had prepped earlier ensure it is secured so there is no risk of it falling off or the wires snapping after a while.

 

Test it Out

Once everything is set up, turn the power back on and test to see if the switch is working.  You can also use a multimeter to see if the circuit is complete or where it needs fixing.

 

Safety Precautions

Although wiring a rocker switch is really simple, there is a possibility of there being accidents during the installation. Here are a couple of safety tips that come in handy for you:

• Always switch off the power before work starts. Most accidents occur because the circuit was live when the installation was happening.
• Use the right tools. Apart from saving you time, they also ensure there is no damage to the switch of the circuit during installation.
• When in doubt, Even though everyone loves a bit of DIY, it doesn’t kill to ask questions when you are unsure of what you are doing. The manuals offer some guidance, but if you still don’t understand the wiring process, simply talk to a professional to help you with it.

Wiring a 12V rocker socket is really simple. At APIELE, we offer pointers on what you need to do and will help you figure out what steps you might have missed.

Reach out today and let us revolutionize your wiring. We have different rocker switches in our catalog and will ensure that no matter what choice you make, we always deliver it to you. Contact us today to place your order.